The problem with circuit design is to make MOS transistors operate in a linear state rather than in a switching state. This is also one of the reasons for the heating of MOS transistors.
Categories：Product knowledge Date：2025-01-14 Hits：470 View »
Organic field-effect transistors (OFETs) have received great attention from researchers due to their outstanding characteristics, including wide material sources, compatibility with flexible substrates, low-temperature processing, suitability for mass production, and low cost.
Categories：Product knowledge Date：2025-01-13 Hits：549 View »
When VGS>VTH, MOSFET behaves as a voltage controlled resistor; However, making MOSFETs the leader in integrated circuits today is definitely not just about voltage controlled resistors.
Categories：Product knowledge Date：2025-01-13 Hits：622 View »
Unidirectional thyristor is composed of semiconductor materials with three PN junctions.
Categories：Product knowledge Date：2025-01-13 Hits：579 View »
1. Overvoltage breakdown, 2. Overcurrent and overheating breakdown, 3. Overheating breakdown
Categories：Product knowledge Date：2025-01-10 Hits：590 View »
To make the thyristor conductive, the following conditions must be met
Categories：Product knowledge Date：2025-01-10 Hits：453 View »
Zener diodes are also a type of diode. When working normally, Zener diodes operate in the reverse breakdown region, where the current changes greatly while the voltage changes very little, thus achieving a voltage stabilization effect.
Categories：Product knowledge Date：2025-01-10 Hits：514 View »
Compared with parallel inverters, thyristor series inverters have more advantages:
Categories：Product knowledge Date：2025-01-09 Hits：459 View »
When a forward voltage is applied between the anode and cathode of a thyristor and no voltage is applied to the control electrode, the thyristor is in a forward blocking state.
Categories：Product knowledge Date：2025-01-09 Hits：518 View »
When the thyristor is damaged and needs to be inspected and analyzed for its cause, the core can be removed from the cooling jacket, the core box can be opened, and the chip can be removed to observe the traces after the damage to determine the cause.
Categories：Product knowledge Date：2025-01-09 Hits：648 View »
